languageEnglish
  • English

Classic Combo Pack - Small

Classic Combo Pack - Small
£7.99

Maximum number of characters: 2000

* Required Fields

£7.99
  • Detail
  • Shipping
  • REVIEWS
  • Return Policy

Iron On/Sew In Labels


The material we use is regarded by many to be superior to other iron-on name labels available on the market and in many cases have been known to remain attached for the lifetime of the garment.


Label size 46mm x 12mm, they are pre-cut and have rounded corners as shown in the pictures. The labels use a lovely soft fabric with an advance glue which sticks to your clothes when you iron them on.


How to Apply if using as Iron on


1. Set iron to dry/non-steam mode. Temperature 130-170 degrees.


2. Hold iron flat, press the name tape in place for 10-15 seconds. DO NOT move the iron around.


3. Allow the garment to cool down.


4. Repeat steps 2 and 3 again (at least 3 times in total - allowing time to cool in between)


5. Use a thin pressing cloth on delicate fabrics


 


IF ENOUGH HEAT IS NOT APPLIED THE ADHESIVE WILL NOT BE PROPERLY ACTIVATED AND THEREFORE LABELS MAY COME OFF AFTER FIRST WASH. IF YOUR IRON DOES NOT HEAT UP HIGH ENOUGH THEN REPEAT THE IRONING PROCESS A FEW EXTRA TIMES


 Please note


- These labels should be applied direct to the fabric of the clothing and not the manufactures label on the clothing itself


- Iron on labels may not be suitable for fluffy, knitted or terry towelling like materials - for obvious reasons, the adhesive needs a flat stable surface to stick to. Teflon coated material may not work either (it's non-stick).


- Label adhesion is certified up to 40 degrees domestic wash, with no tumble drying if Ironed on


- The labels will be removed if you do not follow the iron-on label steps above. Also if tumble dried you find the label will remove.


Stick On Labels


Excellent durable labels to personalise anything from Kids lunch boxes and Bottles to Sports bottles, Jar in the Kitchen and anything else with a Smooth Surface. They come with a strong Adhesive and therefore are waterproof and dishwasher safe on the top rack.


The material we use is regarded by many to be superior to other Sticker name labels available on the market and in many cases have been known to remain attached for the lifetime of the item.


Label size 46mm x 12mm, they are pre-cut and have rounded corners as shown in the pictures. 


I will be providing clear protective covers to be used over the label an extra long life. Please ensure you use the clear over.


 Please note


The stick on Labels are waterproof and dishwasher proof on the top shelf only.


These cannot be used in sterilisers.


Feet Shaped Shoe Labels


The Shoe sticker is made of Vinyl and has a Permanent Adhesive and is Waterproof, however to increase longevity further I will be providing a ?Clear Over? Labels which you stick over the feet labels. Please ensure you use these as the feet labels can move if too much heat or friction is applied to it directly.


 


 Please be aware of the following


- Names will be printed starting with a capital letter and in lower case eg: Joe Bloggs unless you specifically ask us to print the name all in CAPITALS eg: JOE BLOGGS


- Check your details, No changes can be made once we process your order.


- Please be aware that some fonts will capitalise the name as part of the font design eg Stencil


- Please order the correct colour from the drop down as we will not be held responsible if you have ordered the wrong colour on the invoice and later email us stating a different colour as items are printed in colour batches and therefore the item will be grouped according to invoice information


- If no information for printing is received within 3 days of order then the order will be cancelled. Emails will be sent requesting information therefore please check you inbox.


- If no logo is asked for when the order has been placed then no logo will be printed


When being taking through to Paypal please put the name details and your choices in the notes box, if you forget then please message us.


Text is printed in Comic Sans unless you ask for a different font


Iron On Labels and Stickers


- We can print up to 25 characters per line and up to maximum 2 lines per label in the standard font such as Comic Sans, Arial, if you need more characters then please send us a message with the name to enable me to check if we can fit the name on the label, to ensure it is legible.


Feet Shaped Shoe Labels


- We can print up to 20 characters per line and in the standard font such as Comic Sans, Arial if you need more characters then please send us a message with the name to enable me to check if we can fit the name on the label, to ensure it is legible.


We will provide full refunds or re-print if it is our mistake, however we shall not be held any responsible if information supplied is incorrect.